Home > Appliances > Dryer squeals sometimes while running

Dryer squeals sometimes while running

October 26th, 2009

My stackable Whirlpool dryer is model no. MLE2000AYW. It squeals when running sometimes. What could it be and how can I fix it?

I will give you 5 reasons of the proable reasons for your trouble The most # that are the trouble causes, #1- FAULTY DRUM SUPPORT SLIDES :: #2 – NOISY SUPPORT ROLLERS:: #3- THE MOST REASON _ DRY DRUM BEARINGS ::#4- NOISY IDLER PULLY :: #5- SOMETIMERS- LOOSE BLOWER:: #6- this is one that will happen one time in a thousand times ( WORN DRUM BELT :: BUT IT IS USEALLY A THUMPING SOUND:: . #3 has been the cause most of the time ; I have found several on this site and had them to put a HIGH TEMP GREESE IN THE BEARINGS AND IT HAS HELPED :: IT DOES FOR A FEW MONTHS:: THEY BECOME DRY FROM ALL THE HEAT THAT IS ON THEM ALL THE TIME ::
#2 AND 3 -GREESE the SUPPORT SLIDES AND THE DRUM BEARINGS
#4- Check the idler pully for a lot of wear and dry , May have to replace roller, GREESE::
# 6 – CHECK THE DRUM BELT FOR BADLY WORN PLACES AND FOR SPLITS AND CRACKS IN THE BELT ( BREAKS ):: IF THER IS REPLACE THE BELT :::
#2&3 – To get to them you will have to raise the top of the dryer and remove it ,( FIRST OF ALL LETS DIOSCONNECT THE POWER CORD AT THE WALL RECEPTICAL ), NOW lets remove the dryer front cabinet panel :: THE DRUM can now be removed , NOTE ( ON SOME MODLES YOU CAN NOT REMOVE THE DRUM UNTILL YOU MUST FIRST REMOVE THE DRUM SUPPORT SLIDES LOCATED AT THE FRONT OF THE DRYER CABINET :IF YOU DONT HAVE TO DO THIS ROLLER AND PULLY & GREESE :: :: OH BEFORE REMOVING THE DRUM YOU WILL HAVE TO REMOVE THE DRUM BELT TO REMOVE THE BELT :: PUSH THE IDLER ARM FORWARD AND ALLOW THE BELT TO SLIP FREE

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • MisterWong
  • Y!GG
  • Webnews
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • TwitThis

admin Appliances , , , , , , , , , , , , , , ,

  1. No comments yet.
  1. No trackbacks yet.
You must be logged in to post a comment.