Archive

Posts Tagged ‘Tension’

maytag dryer intermittent ceasing

March 21st, 2010

Hi I service an apt. complex with 2 washrooms. The commercial maytag machines i believe were bought around the same time. About 6 months ago i replaced the motor on one of the dryers. It had the typical screeching and whining coming from the motor. The other dryer in question i am told, that especially at the beginning of the day, possibly the first use that the dryer won’t start up and i guess the motor possibly buzzes when the start button is pushed. I also was told by one tennant if they physically push one of the baffles to turn the drum that this solves it sometime and the motor will start up. I tested it yesterday in the middle of the day with no load and i stopped and restarted it and never saw a problem. I put my amp meter on it and at start up it pulled about 24 amps and then immediately went to 6.5 amps. I even put my arm on a baffle fin while it was running to stop the drum to compare it to the other dryer and i feel like it took the same amount of force on both of them before they stopped automatically from the excessive drag. Also, when i turn the drum by hand the tension seems to be equal to the working dryer. Is the motor possibly cutting out? The model is mdg16csaww Thanks

If the symptoms that the tenants described can be trusted, then it think that it is safe to say that the motor is bad. I have experienced the same symptoms several times before and motor replacement was the fix. The problem will probably continue to occur more frequently as time progresses, so just wait till they the tenants complain a little bit more to confirm the motor.

admin Appliances , , , , , , , , , , ,

Kenmore dryer, model #110.96880110

February 22nd, 2010

I have been trying to troubleshoot this dryer and found your forums. Here is a description of the issue and what I have done to date:

1) The motor would try start but would not.
2) After some searching for a solution online, I checked the motors resistance and after probing the terminals and ground, determined that the motor is still good.
3) I then turned the drum by hand to ensure that it was in fact able to turn.
4) I put the dryer back together and started it again.
5) It started, ran for about 3 to 5 seconds and then stopped.
6) During this time, it appeared that tension is building up somewhere and that is why the dryer stops.

Does this possibly have to do with rollers and/or seals? If so, how do I fix this? If not, what is your best guess?

Thank you in advance for any suggestions.

*Edit* I just turned the drum some more and low and behold the dryer is now running and not stopping. I am sure though that at some point, it is going to stop and then need repair. I am sure it needs a repair now but I have clothes that need drying! lol

Anyhow, some advice on possible issues is still appreciated.

Hi,

Please double check your model# again, I can’t get any information on that one.

Have you checked your blower wheel? one time I saw a lint clog in one that was doing the same as yours.

admin Appliances , , , , , , , , ,

DIY Can Save You Money

January 14th, 2010

Are you a do-it-yourself enthusiast? More and more people are getting into DIY. With the current state of the economy, fewer people are choosing to move home. Many are making do with their present circumstances and repairing and remodelling their houses.

Is DIY for you? What should you ask yourself before engaging in DIY work on your property?

Consider some of the areas where you could save money by doing it yourself: Projects in the bathroom; bedroom; dining room; games rooms; garage; home office; kitchen; landscape; living room; patio & decks.

Bear in mind that not all DIY jobs you do on your home will increase the value of your home.

Painting and decorating your home, for example, can be very worthwhile. It isn’t likely to put much value on your property, but it will of course make it far more saleable.

Count The Cost

Before ever starting a job, work out its cost. You will find that a comparison of the charges of a skilled professional with the cost of materials for what you would need to do it yourself will be revealing. But do not forget the hidden extras. What are they?

Many professionals guarantee that their work will meet a certain standard at a specified time. If they fail, you can often seek some type of compensation. In the long run, to pay a little more and benefit from the services of a professional may be to your advantage.

Another factor to reckon with is the cost of your time. Being ‘married’ to DIY work can cause tension with family and friends.

It is possible, nevertheless, to maintain good family relationships and still work on do-it-yourself projects. How? By enlisting the help of your family. They can join you, either in planning or in actually doing the work, perhaps even taking care of some of your other duties while you concentrate on the work to be done.

You may work things out well, planning the project and enlisting the cooperation of your family, but do you have the right tools?

The Right Tools

Basic tools to consider buying-

* 12 foot tape measure

* Claw hammer

* Insulated pliers

* Set of screwdrivers

* Junior hacksaw

* Box cutter with retractable blade

* Spirit level

* Small adjustable spanner

On occasion, you may find renting some of the larger power tools a viable option if their purchase price is too great but the need vital. You can manage many a DIY project with very basic tools. However, for these to be of lasting value, care for them well.

Where will you keep your tools? When deciding on a storage area, make sure the tools are protected and treated properly so they remain in good condition. Throwing tools together in a drawer can damage them. Arrange a designated place for each tool. Fasten a board on the wall of your workshop or tool cupboard. Then clasp and hang the tools there.

Some hand tools that are used under tension, such as fretsaws, may require release before storage. Most tools will require cleaning and oiling to maintain their value. Make tool maintenance a part of whatever do-it-yourself project you undertake.

You have figured out the cost and opted to do it yourself. You have all the tools ready and in good condition. ‘But there is something missing,’ you say. ‘I am not experienced.’ Does this mean that DIY work is ruled out?

Success Without Experience?

Success on a first-time job does not come automatically. A helpful guide, though, is always follow the instructions. But whose instructions?

Before you start any DIY, consult the experts. You can draw on the accumulated wisdom of the experts by reading their suggestions in many DIY manuals. Or, if you know someone who has already successfully done a similar job, ask him how he managed it and what tips he can offer.

Safety, Safety, Safety!

Remember the need for safety. Use the tools only in the way they are intended to be used. If your children help you, teach them respect and proper care for tools, especially for those that are sharp and dangerous.

The variety of projects that you can undertake for yourself is great. But to avoid being unbalanced in such jobs, take into account other people’s advice. Then adapt the suggestions to your own circumstances. Whatever the proposed project, study it carefully before you decide to do it yourself.

If doing anything with electricity, remember that safety has to come first. Don’t take shortcuts, it might mean your life! If working with gas, unless you are properly qualified, and are registered as such with the appropriate authorities, then you must get in a qualified person, and not attempt to tackle the work yourself.

Geoff Cummings runs a DIY tools site at http://www.ourhometools.com where visitors will find the right products at the right prices.

admin Uncategorized , , , , , , , , , , , , , , , , , , , , ,